moflon slip rings
MSDI230 Series HD-SDI Slip Rings

Single Channel HD-SDI + 12~30 Circuit Signal (2A)

MSDI230 high-definition slip ring supports 1 channel HD-SDI signal (coaxial-cable) + 12~30 circuits Signal (2A). MSDI series HD-SDI slip rings are high-end products, specially designed to support high Definition video signal 1080P. This series slip ring can support max transfer rate 2.3GHZ, also can Combine with 1~30 circuits signal and weak current.

This series product brings in and adopts military-grade surface treatment process in USA. This series slip ring deals with brushes for hard gold plating, which guarantees the low resistance fluctuation and long working life.

This product is mainly used for transmitting weak controlling signal for small and medium application, such as video,control, sensor, power, Ethernet, etc.
Typical application: HD security monitor, photographic camera, HD camera.


Specification
RF Rotary Joint Specifications
ParameterValueParameterValue
FrquencyDC-2.3GHzInsertion Loss0.65dB/1GHz Max
Insertion loss typical+/-0.05dBReturn loss-18 dB/1GHz Max
In put out putRG-179/UMax speed50RPM
Volt standing wave ratioVSWR≤1.3wave ratio typical+/-0.05
Working Life200 million RevsConnector TypesBNC/F
Impedance75 ohmsRating CurrentDC 1A Max
Electrical data
ParameterValue
PowerSignal
Rated Voltage0~440VAC/VDC0~440VAC/VDC
Insulation Res≥1000MΩ/500VDC≥1000MΩ/500VDC
Lead WiresAWG28#TeflonAWG28#Teflon
Lead LengthStandard 300mm
Dielectric Strength500VAC@50Hz,60s
Res Noise<0.01Ω
Mechanical data
ParameterValue
Working Life10Million Revs.
Rotating Speed250RPM
Working Temp.-30℃~80℃
Operating Humidity0~85% RH
Contact MaterialGold-Gold
Housing MaterialAluminium Alloy
Torque0.05N.m;+0.01N.m/6ring
Protection gradeIP51




MSDI230 High-definition slip ring part list table
Part#HD-SDIcommunication ratesignal(2A)OD*L
MSDI2301 channel RG-179(75Ω)DC-3GHz30Φ32.8mm*46.71mm