moflon slip rings
Standard Slip Rings
  • Designed for through bore hydraulic or pneumatic rotating shaft installation
  • bore size from 12.7 to 300mm
  • Standard, off-the-shelf
  • Gold plated ring and Gold alloy brush
  • Support power,signals transmitting
  • Rings combination is available
  • Designed for current>20A application
  • Specially wind turbine application
  • Support 20A,30A,60A,100A,250A...
  • Standard, off-the-shelf,in stock
  • free maintenance,longer working life
  • Solid,through bore,flange are available
  •  
  • Rotor Flange Slip Ring, without through bore, suitalbe for flange face mounting.
  • Can achieve more circuits and higher current.
  • With ample inner space.
  • Used to customize sensitive signals or encoder signals.
  • Stator Flange Slip Ring,without through bore, suitalbe for flange face mounting.
  • Can achieve more circuits and higher current.
  • With ample inner space.
  • Used to customize sensitive signals or encoder signals.
  • Designed for Yaskawa, Panasonic, Mitsubishi, Siemens servo motor
  • It can also combined with rotary joint.
  • Gold Alloy brush,Gold plating Rings
  • Inner wiring and shield structure and totally prevent the mistake of encoder error.
  • power,Signal mixed
  • Designed for underwater working
  • Industrial quality level, stator flange,option for IP65,IP68,Gold-gold contact,import seals with military electroplating
  • Multipoint attachment,cable exit with gland and water-poof cable
  • Support ODM/OEM
  • Designed for 100M,1000M Ethernet transmitting
  • Combine with Power/other signal wires
  • Special optimization for 1000M Ethernet
  • Shaft mounting or flange mounting
  • Error free data communication
  •  
  • Designed for high speed data and error free data communication transmission
  • Patented 'broadband' slip ring technologys
  • Transfers control and data signals
  • Support Profibus,CanBus,Control Net,Device Net,USB2.0,1000M Ethernet
  •  
  • Support 1/2/3/4/5/6/8/10/12/16 Pneumatic/Hydraulic passage.
  • combine 1~128 wires electrical power/signal.
  • Media type:Air/gas,chemical,DI/Tap water,oil.High speed and high voltage can be customized.
  • Support Air/Gas + Hydraulic + Electric
  • Combine with Power/other signal wires
  • Stardard,ready available solution
  • Pipe size on request
  • Solid or Through bore are both available
  •  
  • 360 degree transfer gas,liquid etc medias
  • Support 1/2/3/4/5/6/8/10/12/16 pneumatic/Hydraulic passages
  • Standard port:M5,G1/8,G1/4,G3/8,G1/2,G3/4,G1"etc.Can transfer air,vacuum,hydraulic oil,water,hot water,cooling water,Steam etc medias.
  • Low Torque 0.05N.m, Competitive price
  • 1,2,4,6,8,10,12,16 Passages
  • Suitable for pneumatic, vacuum and so on
  • Port Size:M5, completely replace for SMC series
  • Standard off-the-shelf
  • Support ODM/OEM
  • Bore size 20,30mm, 360 degrees rotating
  • multi-channel transmitting pneumatic and hydraulics
  • media as compressed aird, vacuum, hydrogen,nitrogen,steam,cooling water,hot water,oil and so on.
  • Support ODM/OEM
  • Fiber optic rotary joints(FORJ)
  • Support 1/2/4 channel fiber optics
  • < 1mOhm contact resistance
  • Mixed with signal/power wires
  • High-Speed Data Transmission
  • large amounts of data transmitting
  • No noise
  • 1/2/3/4 channel high-frequency rotary joints
  • up to 18Gbits/s
  • Combine with Power/other signal wires
  • Stardard,ready available solution
  • Solid,no bore
  • Designed for HD-SDI/1080P CCTV
  • Combine with Power/other signal wires
  • stardard,off-the-shelf
  • High speed frequency rate 2.3GHz
  • 1 channel RF, > 3Gbps
  •  
  • Designs for CCTV or small rotating system, OD 22mm
  • Gold-Gold fiber brush and contacts
  • Standard, off-the-shelf,no through bore
  • Lower torque low contact wear rates
  • Support video, control,sensor,power, Ethernet signals
  • Designs for CCTV or tiny rotating system, OD<12.5mm
  • Gold-Gold fiber brush and contacts
  • Standard, off-the-shelf,no through bore
  • Lower torque low contact wear rates
  • Support video, control , sensor, power, Ethernet signals
  • Designs for 1.25-4MW wind turbine
  • Resistant to low temperature, high humidity, anti-sand, corrosion resistance, impact resistance, anti-vibration, stable performance
  • Working life up to 20 years or hundreds of million turn.
  • Designed when length is at a premium but diameter is less restrictive
  • Gold Alloy brush,Gold plating Rings
  • support hole size from 12.7mm to 70mm
  • Max power 30A,Signal mixed
  • Quick delivery
  • Support ODM/OEM
  • Small height,large diametere
  • Especially widely used in small space
  • Thickness can up to 5.8mm
  • Precious metals contact with high stability, high reliability
  • Quick delivery
  • Support ODM/OEM
  • Designed for rotor and brush block(stator) could settle down as space limitation.
  • specially fit for kinds of precise instruments
  • Gold-Gold contact
  • Compact size
  • Support 2~12 wires
  •  
  • Designed for USB1.0,USB2.0 signal transmitting
  • Combine with Power/other signal wires
  • Special optimization for USB2.0
  • Shaft mounting or flange mounting
  • specified female,male usb connectors
  • With aviation plug on both rotor and stator side.
  • Easy for installation and replacement.
  • IP51,IP65,IP68 Optional.
  • It saves the time and trouble of wire bonding